ActionTec Wireless DSL Gateway GT704WG-QW04 Uživatelský manuál stáhnout pdf (Strana 42)

Actiontec DSL Gateway User Manual

Chapter 4 Configuring Advanced Settings



Note: Before Remote Management can be activated, the admin-

istrator password must be set. To do this, go to the Setup screen

and select Change Admin Password. Follow the instructions in

the subsequent screens

To access the Gateway via Telnet, activate Remote Telnet by selecting On next to

“Remote Telnet.”

Port Forwarding

Selecting Port Forwarding in the “Advanced Settings” screen generates the “Port

Forwarding” screen. Port forwarding allows certain programs to bypass the

Gateway’s built-in firewall, allowing access to parts of the network (for hosting a

Web or ftp server, for example). To use port forwarding, enter the IP port range

in the “IP Port Range” text boxes. (If more than 10 ports are needed, Actiontec

recommends using DMZ Hosting. See “DMZ Hosting” on the next page for more

information.) Choose the protocol type from the “Protocol” list box, then enter the

IP address of the computer on the network to be used as a host. Click Add. The

forwarded ports appear in the “List of Forwarded Ports” text box.

To remove forwarded ports, highlight them, then click Remove.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 96 97

Žádné komentáře

ActionTec Wireless DSL Gateway GT704WG-QW04 Uživatelský manuál Strana 42